A numerical model of the EDM process considering the effect of multiple discharges

作者：Izquierdo B^*; Sanchez J A; Plaza S; Pombo I; Ortega N

来源：International Journal of Machine Tools and Manufacture, 2009, 49(3-4): 220-229.

DOI：10.1016/j.ijmachtools.2008.11.003

• EDM
• Thermal model
• Roughness prediction
• Material removal rate

The electrical discharge machining (EDM) process is, by far, the most popular amongst the non-conventional machining processes. The technology is optimum for accurate machining of complex geometries in hard materials, as those required in the tooling industry. However, although a large number of EDM machines are sold every year, scientific knowledge of the process is still limited. The complex nature of the process involves simultaneous interaction of thermal, mechanical, chemical and electrical phenomena, which makes process modelling very difficult. In this paper a new contribution to the simulation and modelling of the EDM process is presented. Temperature fields within the workpiece generated by the superposition of multiple discharges, as it happens during an actual EDM operation, are numerically calculated using a finite difference schema. The characteristics of the discharge for a given operation, namely energy transferred onto the workpiece, diameter of the discharge channel and material removal efficiency can be estimated using inverse identification from the results of the numerical model. The model has been validated through industrial EDM tests, showing that it can efficiently predict material removal rate and surface roughness with errors below 6%.

• 出版日期2009-3