A Millimetre-sized Robot Realized by a Piezoelectric Impact-type Rotary Actuator and a Hardware Neuron Model

作者：Takato Minami^*; Tatani Masaki; Oku Hirozumi; Okane Yuki; Tanida Junichi; Yamasaki Shinpei; Saito Ken; Uchikoba Fumio

来源：International Journal of Advanced Robotic Systems, 2014, 11(7): 99.

DOI：10.5772/58671

• Piezoelectric Actuator
• Impact Type
• MEMS
• Millimetre-size Robot
• Hardware Neuron Model

Micro-robotic systems are increasingly used in medicine and other fields requiring precision engineering. This paper proposes a piezoelectric impact-type rotary actuator and applies it to a millimetre-size robot controlled by a hardware neuron model. The rotary actuator and robot are fabricated by micro-electromechanical systems (MEMS) technology. The actuator is composed of multilayer piezoelectric elements. The rotational motion of the rotor is generated by the impact head attached to the piezoelectric element. The millimetre-size robot is fitted with six legs, three on either side of the developed actuator, and can walk on uneven surfaces like an insect. The three leg parts on each side are connected by a linking mechanism. The control system is a hardware neuron model constructed from analogue electronic circuits that mimic the behaviour of biological neurons. The output signal ports of the controller are connected to the multilayer piezoelectric element. This robot system requires no specialized software programs or A/D converters. The rotation speed of the rotary actuator reaches 60 rpm at an applied neuron frequency of 25 kHz during the walking motion. The width, length and height of the robot are 4.0, 4.6 and 3.6 mm, respectively. The motion speed is 180 mm/min.

• 出版日期2014-7-14