A Novel 6/4 Flux-Switching Permanent Magnet Machine Designed for High-Speed Operations

作者：Li Yingjie; Bobba Dheeraj; Sarlioglu Bulent

来源：IEEE Transactions on Magnetics, 2016, 52(8): 8107109.

DOI：10.1109/TMAG.2016.2547366

• Dual-stator machine
• flux-switching machine
• high-speed machine
• novel topology
• permanent magnet (PM) machine

The purpose of this paper is to investigate a novel flux-switching permanent magnet (FSPM) machine that is amenable for high-speed operation. The low-pole topology of high-speed machine is favorable to minimize fundamental frequency requirement. The lowest possible three-phase topology of the FSPM machine, with six stator slots and four rotor poles (6/4), has unacceptably large second-order harmonic distortion in the flux linkage and severe cogging torque in its conventional single-stator-single-rotor form. To resolve these challenges, a novel dual-stator structure is proposed that eliminates the even-order harmonics in the flux linkage. Harmonic distortion and cogging torque are notably reduced in the proposed machine. The principles of operation and design methods are described in this paper. The properties of the proposed dual-stator 6/4 FSPM machine are compared with a conventional 6/4 FSPM machine and a conventional 12/10 FSPM machine for a 5 kW, 15 000 r/min design. Comparison results gathered from 3-D finite-element analysis demonstrate that the proposed dual-stator 6/4 FSPM machine achieves significantly better flux linkage, back EMF, and cogging torque than the conventional 6/4 design and better efficiency than the conventional 12/10 FSPM machine.

• 出版日期2016-8