Second order anisotropy contribution in perpendicular magnetic tunnel junctions

作者：Timopheev A A^*; Sousa R; Chshiev M; Nguyen H T; Dieny B

来源：Scientific Reports, 2016, 6(1): 26877.

DOI：10.1038/srep26877

Hard-axis magnetoresistance loops were measured on perpendicular magnetic tunnel junction pillars of diameter ranging from 50 to 150 nm. By fitting these loops to an analytical model, the effective anisotropy fields in both free and reference layers were derived and their variations in temperature range between 340 K and 5 K were determined. It is found that a second-order anisotropy term of the form -K(2)cos(4)theta must be added to the conventional uniaxial -K(1)cos(2)theta term to explain the experimental data. This higher order contribution exists both in the free and reference layers. At T = 300 K, the estimated -K-2/K-1 ratios are 0.1 and 0.24 for the free and reference layers, respectively. The ratio is more than doubled at low temperatures changing the ground state of the reference layer from "easy-axis" to "easy-cone" regime. The easy-cone regime has clear signatures in the shape of the hard-axis magnetoresistance loops. The existence of this higher order anisotropy was also confirmed by ferromagnetic resonance experiments on FeCoB/MgO sheet films. It is of interfacial nature and is believed to be due to spatial fluctuations at the nanoscale of the first order anisotropy parameter at the FeCoB/MgO interface.

• 出版日期2016-6-1
• 单位中国地震局