Adsorption of poly(acrylic acid) on the surface of microporous activated carbon obtained from cherry stones

作者：Wisniewska M^*; Nowicki P; Nosal Wiercinska A; Pietrzak R; Szewczuk Karpisz K; Ostolska I; Sternik D

来源：Colloids and Surfaces A: Physicochemical and Engineering Aspects , 2017, 514: 137-145.

DOI：10.1016/j.colsurfa.2016.11.053

• Microporous activated carbon
• Poly(acrylic acid) adsorption
• Cherry stones
• Direct activation
• Electrokinetic properties

The adsorption properties of microporous activated carbon (CSDA) obtained by direct activation of cherry stones in relation to low -molecular weight poly(acrylic acid) - PAA were examined. The solution pH influence and molecular weight of the polymer were examined. The PAA adsorbed amounts were correlated with the solid surface charge density and zeta potential of the solid particle in the polymer presence. The obtained results indicated that the highest adsorption on the activated carbon surface is exhibited by PAA with lower molecular weight at pH 3 (it reaches the level of 25 mg/g). Thus, under such conditions the CSDA is the most efficient adsorbent for poly(acrylic acid) removal from aqueous solution. The polymeric adsorption layer at pH 3 is composed of more coiled macromolecules (low degree of PAA carboxyl groups dissociation) which are electrostatically attracted to the positively charged solid surface. It was also proved that applied low-cost activated carbon can be used for removal of undesirable low -molecular polymers from wastewaters.

• 出版日期2017-2-5