摘要

An opened natural fracture (NF) intercepted by a pressurized hydro-fracture (HF) will be diverted in a new direction at the tips of the original NF and subsequently form a complex fracture network. However, a clear understanding of the diversion behavior of fracture networks in tight reservoirs with frictional NFs is lacking. By means of the extended finite element method(XFEM), this study investigates the diversion mechanisms of an opened NF intersected by an HF in naturally fractured reservoirs. The factors affecting the diversion behavior are intensively analyzed, such as the location of the NF, the horizontal principal stress difference, the intersection angle between HF and NF, and the viscosity of the fracturing fluid. The results show that for a constant length of NF (7 m): (1) the upper length of the diverted fracture (DF) decreases by about 2 m with a 2 m increment of the upper length of NF (Lupper), while the length of DF increases 9.06 m with the fluid viscosity increased by 99 mPa s; (2) the deflection angle in the upper parts increases by 30.8 ffi with the stress difference increased by 5 MPa, while the deflection angle increases by 61.2 ffi with the intersection angle decreased by 30 ffi. It is easier for the opened NF in lower parts than that in upper parts to be diverted away from its original direction. It finally diverts back to the preferred fracture plane (PFP) direction. The diversion mechanisms of the fracture network are the results of the combined action of all factors. This will provide new insight into the mechanisms of fracture network generation in tight reservoirs with NFs.