Discrete element method simulation of three-dimensional conical-base spouted beds

作者：Takeuchi Shintaro; Wang Shan; Rhodes Martin^*

来源：Powder Technology, 2008, 184(2): 141-150.

DOI：10.1016/j.powtec.2007.11.035

• spouted bed
• conical base
• numerical simulation
• discrete element method
• draft tube
• fluidization

A discrete element method (DEM) simulation of three-dimensional conical-base spouted beds is presented. The overall height and diameter of the vessel are 0.5 and 0.15 m, respectively, and the nozzle diameter is 0.02 m. The inclined angle of the conical section varies from 0 to 60 degrees. The gas flow is described by the continuity and Navier-Stokes equations and solved by a finite difference method of second order accuracy in space and time. For gas-particle interaction, the Ergun equation (for void fraction smaller than 0.8) and the Wen-Yu model (for void fraction of 0.8 and above) are employed. A new method for treatment of the boundary condition for 3-D gas flow along the cone surface is proposed. This boundary condition satisfies both the continuity and momentum-balance requirements for the gas phase. Usefulness of the present simulation for Studying gas flow pattern and particle motion, in conical-base spouted beds is demonstrated. The effects of the inclined angle and draft tube oil gas and particle flow in spouted beds are discussed.

• 出版日期2008-5-16