A Zener-Stroh crack interacting with a coated inclusion with generalized Irwin plastic zone correction

作者：Fan, M.; Yi, D. K.; Xiao, Z. M.^*

来源：International Journal of Solids and Structures, 2014, 51(19-20): 3399-3409.

DOI：10.1016/j.ijsolstr.2014.06.007

• Coated inclusion
• Zener-Stroh crack
• Elastic-plastic fracture behavior
• Irwin plastic zone

The elastic-plastic fracture behavior of a Zener-Stroh crack interacting with a coated inclusion in composite materials has been investigated with crack tip plastic zone corrections. With the distributed dislocation method, the crack problem is formulated into a set of singular integral equations which are solved numerically. The plastic zone sizes at the both crack tips are determined by a generalized Irwin model where Von Mises stress yielding criterion is used. The stress intensity factor (SIF), the plastic zone size (PZS), the crack tip opening displacement (CTOD) and the effective stress intensity factor have been evaluated. In the numerical examples, the influence of the inclusion shear modulus, the coating-layer thickness and shear modulus, as well as the distance between the crack and inclusion, on the SIF, the PZS and the CTOD are discussed in detail. Numerical examples show that increasing the shear modulus or the thickness of the coating phase, the influence of the inclusion on the normalized SIF and the normalized PZS will be shielded.

• 出版日期2014-10-1
• 单位南阳理工学院; 河海大学