A study on optimal pore development of modified commercial activated carbons for electrode materials of supercapacitors

作者：Bang Joon Hyuk; Lee Hye Min; An Kay Hyeok; Kim Byung Joo^*

来源：Applied Surface Science, 2017, 415: 61-66.

DOI：10.1016/j.apsusc.2017.01.007

• Activated carbon
• Carbon dioxide
• Supercapacitor

This study aimed to understand the impact of CO2 activation of commercial activated carbons (AC) on the changes in pore characteristics and the electrochemical property. The surface structure of manufactured AC was observed with a X-ray diffraction (XRD); the pore characteristics were analyzed at N-2/77 K isothermal absorption using the Brunauer-Emmett-Teller (BET) and Dubinin-Radushkevich (DR) equations. In addition, the electrochemical characteristics were analyzed by means of an electrolyte of 1 M (C2H5)(4)NBF4/propylene carbonate, using a charge/discharge test, cyclic voltammetry (CV), and impedance. The N-2/77 K isothermal absorption curve of the manufactured AC falls under Type I in the classification of the International Union of Pure and Applied Chemistry (IUPAC) and was found to largely comprise micropores. The specific surface area increased from 1690 m(2)/g to 2290 m(2)/g, and the pore volume grew from 0.80 cm(3)/g to 1.10 cm(3)/g. The analysis of electrochemical characteristics also found that the specific capacity increased from 17 F/g to 20 F/g (in a full cell condition). Based on these results, we were able to determine the pore characteristics of commercial AC through an additional activation process, which consequently allowed us to manufacture the AC with an advanced electrochemical property.

• 出版日期2017-9-1