Analysis of a new ZVS converter with output voltage doubler

作者：Lin B R; Chen J J; Chiang H K^*

来源：International Journal of Electronics, 2009, 96(9-10): 1057-1070.

DOI：10.1080/00207210902977848

• voltage step-up
• power converter
• power electronics
• active clamp

A novel zero voltage switching (ZVS) converter with output voltage doubler is presented. The output voltage doubler is used on the output side to achieve the boost type of voltage conversion ratio. Active-clamping technique is adopted to realise the ZVS turn-on of all switches, release the energy stored in the transformer leakage inductance and limit the voltage stresses on power switches. The ZVS function is achieved at the commutation stage of two complementary switches. The proposed circuit has no large output inductor such that the adopted circuit has a simpler structure, lower cost and no effective duty loss. The voltage stresses on output diodes are clamped at the output voltage. The circuit configuration, operation principles and design consideration are presented. Finally, experimental results based on a 300 W prototype are provided to verify the effectiveness of the proposed converter.

• 出版日期2009-10