An alkali ion source based on graphite intercalation compounds for ion mobility spectrometry

作者：Tabrizchi Mahmoud^*; Hosseini Zahra S

来源：Measurement Science and Technology, 2008, 19(7): 075603.

DOI：10.1088/0957-0233/19/7/075603

• ion mobility spectrometry
• ion source
• alkali cation emitter
• graphite intercalated compounds
• alkali cation attachment

A variety of alkali cation emitters were developed as the ion source for ion mobility spectrometry. The cation emitters were constructed based on alkali ion graphite intercalation compounds (GICs). The compounds were prepared by fusing alkali salts with ground graphite. In order to produce alkali ions, the compounds were loaded on a filament and heated to red. Reactant ions of the form alk(+) ions were observed for the alkali salts NaCl, KCl center dot LiCl, CsCl and SrCl. In addition to Na(+) ions, K(+) ions were observed at the beginning of thermionic emission from Na-GIC. This is due to the low ionization potential of potassium that exists in trace amounts in sodium salts. In addition to the potassium ion, Na(+) was observed in the case of LiCl salt. The Na(+) and K(+) peaks originating from impurities totally disappeared after about 40 min. However, the thermionic emission of the main ion of the corresponding salt lasted for several days. No negative ions were observed upon reversing the drift field. Selected organic compounds (methyl isobutyl ketone, dimethyl sulfoxide, acetone and tetrahydrofuran) were also ionized via alkali cation attachment reaction. Distinct ion mobility patterns were observed for different substances using one type of alkali reactant ion. However, the ion mobility pattern for a given substance changed when a different alkali reactant ion was used. Ammonia and amines were not ionized when this source was used.

• 出版日期2008-7