A viscosity-conversion model for thermal cracking of heavy oils

作者：Rueda Velasquez Rosa I; Gray Murray R^*

来源：Fuel, 2017, 197: 82-90.

DOI：10.1016/j.fuel.2017.02.020

• Visbreaking
• Partial upgrading
• Heavy oil
• Viscosity
• Thermal cracking
• Kinetic model

Thermal cracking processes such as visbreaking are used in the petroleum industry to reduce the viscosity of heavy feedstocks, such as atmospheric and vacuum residues, without forming coke or unstable asphaltenes. Thermal cracking offers a potential method to reduce the viscosity of heavy oils and bitumen, enabling their pipeline transportation with less solvent addition. Viscosity is the most important property for transportation of crude oils, but this property also has a highly non-linear dependence on temperature and composition. In this work, we used a lumped-kinetic model, based on boiling point pseudo-components, coupled with a fluid property model, to correlate the viscosity of two heavy oils subjected to thermal cracking reactions at different severities, and assess the impact of the chemical transformations on the behavior of the heaviest fraction. The properties of these pseudo-components were estimated by validated correlations, and tuned with experimental values. By assuming that after the reactions these properties remained invariable in each boiling point pseudo-component, we could estimate the viscosity of the liquid products from the recombination of these individual properties using mixing rules available in literature. The results indicated that the vacuum residue fractions (>524 degrees C) undergo chemical transformations that alter their fluid properties. By using adjusting factors dependant on conversion, we were able to make estimations of viscosities at different temperatures with absolute average deviations lower than 25%.

• 出版日期2017-6-1