Morphology and properties of stearate-intercalated layered double hydroxide nanoplatelet-reinforced thermoplastic polyurethane

作者：Kotal Moumita; Srivastava Suneel Kumar^*; Bhowmick Anil Kumar; Chakraborty Sunity Kumar

来源：Polymer International, 2011, 60(5): 772-780.

DOI：10.1002/pi.3013

• nanocomposites
• layered double hydroxide
• polyurethane
• mechanical properties
• thermal properties

In the past few years, layered double hydroxides (LDHs) with monolayer structure have been much studied for the development of polymer nanocomposites. LDHs with intercalated stearate anions form a bilayer structure with increased interlayer spacing and are expected to be better nanofillers in polymers. In the work reported, thermoplastic polyurethane (PU)/stearate-intercalated LDH nanocomposites were prepared by solution intercalation and characterized. X-ray diffraction and transmission electron microscopy confirmed the exfoliation at lower filler loading followed by intercalation at higher filler loading in PU matrix. As regards mechanical properties, these nanocomposites showed maximum improvements in tensile strength (45%) and elongation at break (53%) at 1 and 3 wt% loadings. Maximum improvements in storage and loss moduli (20%) with a shift of glass transition temperature (15 degrees C) and an increase in thermal stability (32 degrees C) at 50% weight loss were observed at 8 wt% loading in PU. Differential scanning calorimetry showed a shift of melting temperature of the soft segment in the nanocomposites compared to neat PU, possibly due to the nucleating effect of stearate-intercalated LDH on the crystal structure of PU. All these findings are promising for the development of mechanically improved, thermally stable novel PU nanocomposites.

• 出版日期2011-5