Deep coal seams as a greener energy source: a review

作者：Ranathunga A S^*; Perera M S A; Ranjith P G

来源：Journal of Geophysics and Engineering, 2014, 11(6): 063001.

DOI：10.1088/1742-2132/11/6/063001

• CO2 sequestration
• coal matrix swelling
• enhanced methane recovery
• hydro-fracturing
• permeability
• strength reduction

Today, coal and oil are the main energy sources used in the world. However, these sources will last for only a few decades. Hence, the investigation of possible energy sources to meet this crisis has become a crucial task. Coal bed methane (CBM) is a potential energy source which can be used to fulfil the energy demand. Since the amount of carbon dioxide (CO2) emitted to the atmosphere from the use of CBM is comparatively very low compared to conventional energy sources, it is also a potential mitigation option for global warming. %26lt;br%26gt;This paper reviews CBM recovery techniques with particular emphasis on CO2-enhanced coal bed methane (CO2-ECBM) recovery. The paper reviews (1) conventional CBM recovery techniques and problems associated with them, (2) CBM production-enhancement methods, including hydro-fracturing and enhanced CBM recovery techniques, such as N-2-ECBM and CO2-ECBM, (3) the importance of the CO2-ECBM technique compared to other methods and problems with it, (4) the effect of CO2 injection during the CO2-ECBM process on coal seam permeability and strength and (5) current CO2-ECBM field projects and their progress. %26lt;br%26gt;Although conventional CBM recovery methods are simple (basically related to the drawdown of the reservoir pressure to release methane from it), they are inefficient for the recovery of a commercially viable amount of methane from coal seams. Therefore, to enhance methane production, several methods are used, such as hydro-fracturing and ECBM (N-2-ECBM and CO2-ECBM). The CO2-ECBM process has a number of advantages compared to other methane recovery techniques, as it contributes to the mitigation of the atmospheric CO2 level, is safer and more economical. However, as a result of CO2 injection into the coal seam during the CO2-ECBM process, coal mass permeability and strength may be crucially changed, due to the coal matrix swelling associated with CO2 adsorption into the coal matrix. Both injecting CO2 properties (gas type, CO2 phase and pressure) and coal seam properties (coal rank and temperature) affect this swelling. Although there are many related studies, a number of gaps exist, especially in the area of coal rank and how the effect of other factors varies with the rank of the coal seam. To date, there have been few CO2-ECBM field projects in the world. However, the reduction of CO2 injectability after some time of CO2 injection, due to coal matrix swelling near the well bore, is a common problem in the field. Therefore, various permeability-enhancing techniques, such as hydro-fracturing and injection of an inert gas such as N-2 or a mixture of inert gases (N-2 + CO2) into the seam to recover the swelled areas are under test in the field.

• 出版日期2014-12