Difficulties in the anammox process start-up in sequencing batch reactor at low temperature

作者：Gutwinski P^*; Cema G

来源：Journal of Water Chemistry and Technology, 2017, 39(4): 237-244.

DOI：10.3103/S1063455X17040105

• nitrogen removal
• Anammox
• wastewater treatment
• activated sludge

A promising technology offering significant environmental benefits compared to classical nitrification/denitrification processes appears to be the partial nitrification/Anammox that can be carried out in a one single reactor. In this paper the results of start-up of the CANON process in two lab-scale Sequencing Batch Reactors with continuous and batch flow, at low temperature (20 +/- 2A degrees C) were presented. The results indicate that the CANON process in its initial phase is characterised by high instability. It was showed that the system needs the intensive control of basic technological parameters and that the temperature of 20 +/- 2A degrees C is insufficient for the fast start-up of the CANON process. During first four months of the research, the stable CANON process was not achieved. Further analysis on this pilot-scale system showed that Anammox appeared after about 5.5 months. Results also showed that dissolved organic and free ammonia is the key factor to start-up CANON process.

• 出版日期2017-7