Measurement of Vehicle-Bridge-Interaction force using dynamic tire pressure monitoring

作者：Chen, Zhao; Xie, Zhipeng; Zhang, Jian^*

来源：Mechanical Systems and Signal Processing, 2018, 104: 370-383.

DOI：10.1016/j.ymssp.2017.11.001

• Vehicle-Bridge-Interaction
• Force measurement
• Tire pressure

The Vehicle-Bridge-Interaction (VBI) force, i.e., the normal contact force of a tire, is a key component in the VBI mechanism. The VBI force measurement can facilitate experimental studies of the VBI as well as input-output bridge structural identification. This paper introduces an innovative method for calculating the interaction force by using dynamic tire pressure monitoring. The core idea of the proposed method combines the ideal gas law and a basic force model to build a relationship between the tire pressure and the VBI force. Then, unknown model parameters are identified by the Extended Kalman Filter using calibration data. A signal filter based on the wavelet analysis is applied to preprocess the effect that the tire rotation has on the pressure data. Two laboratory tests were conducted to check the proposed method's validity. The effects of different road irregularities, loads and forward velocities were studied. Under the current experiment setting, the proposed method was robust to different road irregularities, and the increase in load and velocity benefited the performance of the proposed method. A high-speed test further supported the use of this method in rapid bridge tests. Limitations of the derived theories and experiment were also discussed.

• 出版日期2018-5-1
• 单位东南大学