The Contact Resistance Performance of Gold Coated Carbon-Nanotube Surfaces under Low Current Switching

作者：McBride John W^*; Chianrabutra Chama****; Jiang Liudi; Pu Suan Hui

来源：IEICE - Transactions on Electronics, 2013, E96C(9): 1097-1103.

DOI：10.1587/transele.E96.C.1097

• carbon nanotubes
• contact surface
• MEMS switching surface
• fine transfer mechanism
• contact resistance

Multi-Walled CNT (MWCNT) are synthesized on a silicon wafer and sputter coated with a gold film. The planar surfaces are mounted on the tip of a piezo-electric actuator and mated with a gold coated hemispherical surface to form an electrical contact. These switching contacts are tested under conditions typical of MEMS relay applications; 4 V, with a static contact force of 1 mN, at a low current between 20-50 mA. The failure of the switch is identified by the evolution of contact resistance which is monitored throughout the switching cycles. The results show that the contact resistance can be stable for up to 120 million switching cycles, which are 10(6) orders of higher than state-of-the-art pure gold contact. Bouncing behavior was also observed in each switching cycle. The failing mechanism was also studied in relation to the contact surface changes. It was observed that the contact surfaces undergo a transfer process over the switching life time, ultimately leading to switching failure the number of bounces is also related to the fine transfer failure mechanism.

• 出版日期2013-9