科研之友
微信
新浪微博
Facebook
分享链接
摘要
Flotation works very well for particles that are typically in the range 20 to 150 gm in diameter, for base metal ores In this range, It is possible to obtain quite high recoveries in conventional flotation machines Outside this range, the recoveries decline progressively, whether It is with the very fine or the coarse end of the size spectrum In this paper, the reasons for the drop-off in recovery are briefly reviewed, together with strategies for future work Recent progress in the author's laboratory is described This includes the Concorde Cell (TM), which takes advantage of the high dissipation rates in the shock wave created when a gas-liquid mixture reaches supersonic velocities The environment thus created is very beneficial for the flotation of ultra-fines For coarse particles, the reasons for the drop-off in recovery can be related to the highly turbulent nature of the pulp in a conventional flotation cell To improve recovery, it is necessary to find a way of bringing particles and bubbles into contact in a quiescent environment A new process for coarse particle flotation is described in which a fluidized bed is created in the flotation cell The flow conditions are very gentle and the high solids concentration leads to rapid rates of capture of the particles Experimental results are presented It is apparent that the maximum floatable size for coal and minerals can be increased by a factor of ten over the limits found in current practice
- 出版日期2010-10
