科研之友
微信
新浪微博
Facebook
分享链接
摘要
Bolts support have become a major active support method in coal mine roadways to control roadway roof failure and improve surrounding rock structure stability. The traditional bolt force status monitoring (BFSM) method has poor anti-interference performance, is easily affected by harsh downhole environments, and cannot support remote real-time monitoring. This paper presents a fiber Bragg grating (FBG) bolt force sensor that monitors the force of roadway bolts. This sensor uses a cantilever and a diaphragm as elastic elements and two FBGs bonded on the top and bottom surfaces of the cantilever as sensing elements. The experimental results indicate that the measuring sensitivity is improved by using the center wavelength difference between the two FBGs. The sensitivity is 38.79 pm/kN within the range from 0 to 150 kN, and the correlation coefficient reaches 99.98%. The engineering applications show that the FBG sensing technology can automatically acquire, and monitoring results are of great significance in roadway anchorage engineering safety and bolt support quality evaluation. Furthermore, such a sensor is also widely used in quasi-distributed measurement and long-term online monitoring of bolt force status in such fields as geotechnical engineering, tunnel engineering, and slope engineering.
- 出版日期2018-1
- 单位中国矿业大学（北京）
