Using ecological reducing agents instead of sodium sulphide in dyeing with CI Sulphur Black 1

作者：Yao Jiming^*; Dou Chunxiao; Wei Sainan; Zheng Mingyuan

来源：Coloration Technology, 2015, 131(5): 379-383.

DOI：10.1111/cote.12168

Although low-cost sodium sulphide is used as a reducing agent in most sulphur dyeing processes, it is considered to be environmentally unfavourable because of the resultant contaminated wastewater and the toxic hydrogen sulphide generated during the dyeing process. In the present paper, hydrazine sulphate, glucose, and sodium borohydride in the presence of sodium hydroxide were used as ecologically safe reduction systems for the CI Sulphur Black 1 dyeing of cotton fabric, and results were compared with those obtained using sodium sulphide. Dyeing processes were carried out at 90 degrees C for 60 min, and the colour yield (the K/S value), dyeing fastness, and breaking strength of dyed fabrics after soaping were measured. Response surface methodology was employed for experimental design and optimisation of results. Mathematical model equations were derived and statistical analysis carried out by computer simulation programming using Minitab v. 15. At a dosage of 0.8 g l(-1) of CI Sulphur Black 1, the optimum sodium borohydride reduction system (sodium borohydride 0.47 g l(-1), sodium hydroxide 0.65 g l(-1)) exhibited the highest colour yield and the lowest chemical oxygen demand of the residual dyebath.

• 出版日期2015-10
• 单位河北科技大学