Analysis of vibration amplitude in high-speed cutting for hardened steel

作者：Chen Guangjun; Wang Liang; He Baiting; Kong Lingguo; Zhou Xiaoqin

来源：Key Engineering Materials, 2016, 667: 9-14.

DOI：10.4028/www.scientific.net/KEM.667.9

• Corner radius
• Hardened steel
• Orthogonal experiment
• PCBN tool
• Vibration amplitude

<jats:p>The cutting vibration has a great influence on the processing quality of Hardened steel. The research conducted in this paper is about how the cutting parameters influence the cutting vibration amplitude when the hardened steel is cut. The experiments were performed on CNC lathe CAK4085 with PCBN tool, where the cutting speed, feed rate, cutting depth and corner radius had been orthogonally combined. The cutting materials were hardened steel Cr12MoV and GCr15 whose hardness is HRC50-52 and HRC62-64. The cutting vibration amplitude under different group parameters was collected by electric eddy current sensors. An analysis about the influence rule of cutting parameters on cutting vibration amplitude had been made. With the increase of cutting speed, vibration amplitude will increase first, and then decrease. With the appropriate increase of feed rate, vibration amplitude will be reduced. With the increase of cutting depth and corner radius, vibration amplitude will both increase. This research can provide reference for improving cutting quality.</jats:p>

• 出版日期2016--