Adsorptive desulfurization of dibenzothiophene by sewage sludge-derived activated carbon

作者：Nunthaprechachan Thitiwan; Pengpanich Sitthiphong; Hunsom Mali^*

来源：Chemical Engineering Journal, 2013, 228: 263-271.

DOI：10.1016/j.cej.2013.04.067

• Dibenzothiophene
• Adsorption
• Sewage sludge
• Activated carbon
• Isotherm

The removal of dibenzothiophene (DBT) from n-octane was performed using an adsorption process with sewage sludge-derived activated carbons (S-ACs) at ambient conditions. The effect of varying the type of activating agent (ZnCl2, HNO3 and KOH), activating agent:char weight ratio (0.5-6 w/w), carbonization temperature (400-800 degrees C) and time (0.5-2 h) on the physicochemical properties and the adsorption capacity of the S-ACs were investigated. All the studied parameters were found to play an important role on the physicochemical properties as well as the surface chemistry of the S-ACs. The DBT adsorption capacity increased as the increase of oxygen-containing functional group, especially the carbonyl group. The S-AC prepared by KOH-activation exhibited the highest adsorption capacity with up to 14.12 mg/g or around 70.6% DBT removal, which were greater than that of a commercial activated carbon (C-AC) of around 1.28- and 1.22-fold, respectively. The adsorption of DBT via S-AC followed the Langmuir isotherm.

• 出版日期2013-7-15