科研之友
微信
新浪微博
Facebook
分享链接
摘要
Single-axis rotation technique is often used in the marine laser inertial navigation system so as to modulate the constant biases of non-axial gyroscopes and accelerometers to attain better navigation performance. However, two significant accelerometer nonlinear errors need to be attacked to improve the modulation effect. Firstly, the asymmetry scale factor inaccuracy enlarges the errors of frequent zero-cross oscillating specific force measured by non-axial accelerometers. Secondly, the traditional linear model of accelerometers can hardly measure the continued or intermittent acceleration accurately. These two nonlinear errors degrade the high-precision specific force measurement and the calibration of nonlinear coefficients because triaxial accelerometers is urgent for the marine navigation. Based on the digital signal sampling property, the square coefficients and cross-coupling coefficients of accelerometers are considered. Meanwhile, the asymmetry scale factors are considered in the I-F conversion unit. Thus, a nonlinear model of specific force measurement is established compared to the linear model. Based on the three-axis turntable, the triaxial gyroscopes are utilized to measure the specific force observation for triaxial accelerometers. Considering the nonlinear combination, the standard calibration parameters and asymmetry factors are separately estimated by a two-step iterative identification procedure. Besides, an efficient specific force calculation model is approximately derived to reduce the real-time computation cost. Simulation results illustrate the sufficient estimation accuracy of nonlinear coefficients. The experiments demonstrate that the nonlinear model shows much higher accuracy than the linear model in both the gravimetry and sway navigation validations.
- 出版日期2013-11
- 单位中国人民解放军国防科学技术大学
