Achieving Optimal Efficiency in Energy Transfer to a CMOS Fully Integrated Wireless Power Receiver

作者：Cabrera Fabian L^*; de Sousa Fernando Rangel

来源：IEEE Transactions on Microwave Theory and Techniques, 2016, 64(11): 3703-3713.

DOI：10.1109/TMTT.2016.2601916

• Body area networks
• inductive link
• integrated resonator
• Internet of Things (IoT)
• optimal efficiency
• wireless power transfer (WPT)

This paper presents the design and measurement of an inductive link for transferring energy to a fully integrated wireless power receiver. The power receiver design was focused on optimizing each factor that contributes to the link efficiency while its size was constrained to 1.5 mm x 1.5 mm in a conventional CMOS 180-nm process. On the power transmitter side, the primary inductor is printed on an FR4 board and its dimensions are selected so as to optimize its quality factor and the magnetic coupling factor. A strategy is proposed to experimentally determine the performance of the entire system. Using the proposed strategy, we measured a link efficiency of -25.4 dB at a frequency of 986 MHz, with a primary inductor of average diameter 22 mm and distance 15 mm from the receiver. Considering the characteristics of the receiver: monolithic implementation, chip area, link efficiency, and distance to the transmitter, the designed wireless power transfer system exhibits a better performance than state-of-the-art systems.

• 出版日期2016-11