Avoiding blister defects in low-stress hydrogenated amorphous silicon films for MEMS sensors

作者：Wang, Junli; Wu, Lixiang^*; Chen, Xi^*; Zhuo, Wenjun; Wang, Gaofeng^*

来源：Sensors and Actuators A: Physical , 2018, 276: 11-16.

DOI：10.1016/j.sna.2018.04.021

• Blister defect
• Stress control
• Hydrogenated amorphous silicon thin film
• MEMS
• Annealing

Low-stress silicon-based thin films play a crucial role in microelectromechanical systems (MEMS) such as silicon microphones. To obtain low stress, post annealing is usually applied and, in particular, the residual stress of hydrogenated amorphous silicon (alpha-Si:H) can be finely tuned by properly adjusting the annealing temperature to obtain slightly tensile thin films. However, blister defects are unfortunately observed in the course of stress control by high temperature annealing. We study structural parameters of thin films that may induce blistering behaviors and propose a statistical prediction model as a guide to avoid the blistering disaster for MEMS chips. By optimizing the shape, size, and thickness of thin films, the non-blister alpha-Si:H thin film with low stress of around 63 MPa is demonstrated.

• 出版日期2018-6-15
• 单位杭州电子科技大学; 武汉大学