Dual torch plasma arc furnace for medical waste treatment

作者：Liu Bin^*; Kikuchi M; Li Heping; Iwao T; Inaba T

来源：Plasma Science and Technology, 2007, 9(6): 709-712.

• dual torch
• plasma arc furnace
• medical waste

In this paper, characteristics of a dual torch plasma arc used for hazardous waste treatment and operated at atmospheric pressure are studied, and also compared with those of the multi-torch plasma arc and the single torch plasma arc. The dual torch plasma arc is generated between the cathode and anode with argon as the working gas. The temperature distributions of the plasma arc are measured using a spectroscope and line pair method with the assumption of local thermodynamic equilibrium (LTE) for the DC arc current I = 100 A and argon flow rate Q = 15 slpm. The measurements show that the temperatures of the dual torch arc plasma in the regions near the cathode, the anode and the center point are 10,000 K, 11,000 K and 9,000 K, respectively. And the high temperature region of the multi torch plasma arc is of double or much wider size than that of a conventional dual torch plasma arc and single plasma torch. Based on the preceding studies, a dual torch plasma arc furnace is developed in this study. The measured gas temperature at the center region of the argon arc is about 11,000 K for the case of I = 200 A and Q = 30 slpm operated in atmosphere.

• 出版日期2007-12
• 单位清华大学