科研之友
微信
新浪微博
Facebook
分享链接
摘要
Residual stress is lower in friction stir welding (FSW) compared with other melting weldment processes. This is due to being solid-state process in its nature. There are several advantages in utilizing stir welding process. Lower fluctuation and shrinkage in weldment metal-enhanced mechanical characteristics, less defects, and ability to weld certain metals otherwise impractical by other welding processes are to name just a few of these advantages. These have caused an ever increasing attention by the concerned to the process of FSW. In this investigation, three-dimensional numerical simulation of friction stir welding was concerned to study the impact of tool moving speed in relation with heat distribution as well as residual stress. Simulation was composed of two stages. Firstly, thermal behavior of the piece while undergoing the welding process was studied. Heat is generated due to the friction between tool and the piece being welded. In the second stage, attained thermal behavior of the piece from previous stage is considered as inlet heat of an elasto-plastic, thermo-mechanical model for the prediction of residual stress. Also, in the second stage, tool is eliminated and residual stress distribution is found after complete cooling of the piece and disassembly of the clamp. Material characteristic are introduced into the proposed model as temperature-dependent parameters. Obtained residual indicate that heat distribution along thickness varies and is asymmetrical enormously. Moreover, longitudinal residual stress in the weld which increases as speed of process and tool movement ascends. In the prediction of results of residual stress, only heat impact was studied. This was recognized as the main element causing minor difference in results obtained for simulation in comparison with that of actual experiment.
- 出版日期2011-7
