科研之友
微信
新浪微博
Facebook
分享链接
摘要
A hollow fiber membrane (HFM) micro-reactor was developed for the conversion of CO2 to formate for the first time by combining hydrophobic polymer HFMs as a gas distributor and modified polyethylene (PE) HFMs for enzyme immobilization in the same module. The effects of the ventilation mode, polymer type and parameters of bubbling membrane, gas velocity and configurational parameters of the HFM module on the reaction were investigated. Using HFM for aeration, the specific activity of enzyme increased, and the Michaelis constant decreased remarkably. For most membranes investigated, when the porosity and pore size of the aerating membrane increased, the reaction rate initially increased and later decreased. The maximum rate was achieved with PE when the porosity was 50% and the pore size was 0.625 mu m. For the membranes made of the same type of polymer, a higher value for the contact angle corresponded with a higher reaction rate. Upgrading the number of bubbling HFMs and packing density intensified the reaction. The optimum upstream gas velocity decreased as the bubbling HFM number increased. The HFM number for bearing enzyme and the height-diameter ratio of the module had no significant effects on the reaction. HFM-attached enzyme showed excellent reusability and storage stability.
- 出版日期2016-9-15
- 单位北京理工大学
