Amperometric L-lactate biosensor based on screen-printed carbon electrode containing cobalt phthalocyanine, coated with lactate oxidase-mesoporous silica conjugate layer

作者：Shimomura Takeshi^*; Sumiya Touru; Ono Masatoshi; Ito Tetsuji; Hanaoka Taka aki

来源：Analytica Chimica Acta, 2012, 714: 114-120.

DOI：10.1016/j.aca.2011.11.053

• Screen-printed carbon electrode
• Cobalt phthalocyanine
• Lactate oxidase
• Mesoporous silica
• Nafion
• Sampling unit

A novel amperometric biosensor for the measurement of L-lactate has been developed. The device comprises a screen-printed carbon electrode containing cobalt phthalocyanine (CoPC-SPCE), coated with lactate oxidase CLOD) that is immobilized in mesoporous silica (FSM8.0) using a polymer matrix of denatured polyvinyl alcohol; a Nafion layer on the electrode surface acts as a barrier to interferents. The sampling unit attached to the SPCE requires only a small sample volume of 100 mu L for each measurement. The measurement of I.-lactate is based on the signal produced by hydrogen peroxide, the product of the enzymatic reaction. The behavior of the biosensor, LOD-FSM8.0/Naf/CoPC-SPCE, was examined in terms of pH, applied potential, sensitivity and operational range, selectivity, and storage stability. The sensor showed an optimum response at a pH of 7.4 and an applied potential of +450 mV. The determination range and the response time for L-lactate were 18.3 mu M to 1.5 mM and approximately 90 s, respectively. In addition, the sensor exhibited high selectivity for I.-lactate and was quite stable in storage, showing no noticeable change in its initial response after being stored for over 9 months. These results indicate that our method provides a simple, cost-effective, high-performance biosensor for L-lactate.

• 出版日期2012-2-10