Numerical simulation of nanostructured thermoelectric generator considering surface to surrounding convection

作者：Rabari Ronil; Mahmud Shohel^*; Dutta Animesh

来源：International Communications in Heat and Mass Transfer, 2014, 56: 146-151.

DOI：10.1016/j.icheatmasstransfer.2014.06.006

• Thermoelectric
• Convection heat loss
• Numerical simulation
• Nanostructuring

Thermoelectric systems (TE) can directly convert heat to electricity and vice-versa by using semiconductor materials. Therefore, coupling between heat transfer and electric field potential is important to predict the performance of thermoelectric generator (TEG) systems. This paper develops a general two-dimensional numerical model of a TEG system using nanostructured thermoelectric semiconductor materials. A TEG with p-type nanostructured material of Bismuth Antimony Telluride (BiSbTe) and n-type Bismuth Telluride (Bi2Te3) with 0.1 vol.% Silicon Carbide (SiC) nanopartides is considered for performance evaluations. Coupled TE equations with temperature dependant transport properties are used after incorporating Fourier heat conduction, Joule heating, Seebeck effect, Peltier effect, and Thomson effect. The effects of temperature difference between the hot and cold junctions and surface to surrounding convective on different output parameters (e.g., thermal and electric fields, power generation, thermal efficiency, and current) are studied. Selected results obtained from current numerical analysis are compared with the results obtained from analytical model available in the literature. There is a good agreement between the numerical and analytical results. The numerical results show that as temperature difference increases output power and amount of current generated increase. Moreover, it is quite apparent that convective boundary condition deteriorates the performance of TEG.

• 出版日期2014-8