科研之友
微信
新浪微博
Facebook
分享链接
摘要
The Integral Inherently Safe ((IS)-S-2-LWR) reactor was designed to improve the safety performance of PWR types reactors, and several design basis accidents were eliminated using innovative approaches to the (IS)-S-2-LWR plant layout. However, some accidents such as station blackout (SBO), main steam line break (MSLB) type accident - the secondary hot leg break (SHLB) - were deemed statistically relevant, and the work performed here was to simulate these events using the system thermal-hydraulics code RELAP5 coupled to the 3D spatial kinetics code PARCS. The safety response of the reactor to a station blackout is predicted to be acceptable at both beginning of cycle (BOC) and end of cycle EOC core conditions with either the UO2 or U3Si2 fuel options considered here. In the analysis of the SHLB performed here, an unprotected (no SCRAM) condition was assumed to highlight the (IS)-S-2-LWR capabilities. Results indicate that with the UO2 core, the fuel temperatures rise notably, but no fuel melting was predicted and departure from nucleate boiling ratio (DNBR) limits were not exceeded. Similarly, the U3Si2 fuel performed well, but with lower fuel temperatures and decreased DNBR. After the break of the steam line in the (IS)-S-2-LWR, shutdown is achieved after about two minutes via negative reactivity from loss of primary flow. In all cases considered, the (IS)-S-2-LWR appears to accomplish the goals of increased safety performance. Further design improvements and other fuel options may marginally improve on the observed safety performance. Additionally, higher fidelity analysis with the next generation subchannel, Computational Fluid Dynamics (CFD), or full core transport may be useful in refining the prediction of the peak fuel and cladding temperatures, as well limiting DNBR during the accidents.
- 出版日期2020-9-15
- 单位西安交通大学
