Anthropomorphic finger for grasping applications: 3D printed endoskeleton in a soft skin

作者：Tavakoli Mahmoud^*; Sayuk Andriy; Lourenco Joao; Neto Pedro

来源：International Journal of Advanced Manufacturing Technology, 2017, 91(5-8): 2607-2620.

DOI：10.1007/s00170-016-9971-8

• Anthropomorphic fingers
• Compliant joints
• Grasping mechanisms

Application of soft and compliant joints in grasping mechanisms received an increasing attention during recent years. This article suggests the design and development of a novel bio-inspired compliant finger which is composed of a 3D printed rigid endoskeleton covered by a soft matter. The overall integrated system resembles a biological structure in which a finger presents an anthropomorphic look. The mechanical properties of such structure are enhanced through optimization of the repetitive geometrical structures that constructs a flexure bearing as a joint for the fingers. The endoskeleton is formed by additive manufacturing of such geometries with rigid materials. The geometry of the endoskeleton was studied by finite element analysis (FEA) to obtain the desired properties: high stiffness against lateral deflection and twisting, and low stiffness in the desired bending axis of the fingers. Results are validated by experimental analysis.

• 出版日期2017-7