The coil array method for creating a dynamic imaging volume

作者：Smith Elliot^*; Freschi Fabio; Repetto Maurizio; Crozier Stuart

来源：Magnetic Resonance in Medicine, 2017, 78(2): 784-793.

DOI：10.1002/mrm.26404

• gradient coil
• PNS
• local encoding
• coil array

PurposeGradient strength and speed are limited by peripheral nerve stimulation (PNS) thresholds. The coil array method allows the gradient field to be moved across the imaging area. This can help reduce PNS and provide faster imaging for image-guided therapy systems such as the magnetic resonance imaging-guided linear accelerator (MRI-linac).
TheoryThe coil array is designed such that many coils produce magnetic fields, which combine to give the desired gradient profile. The design of the coil array uses two methods: either the singular value decomposition (SVD) of a set of field profiles or the electromagnetic modes of the coil surface.
MethodsTwo whole-body coils and one experimental coil were designed to investigate the method. The field produced by the experimental coil was compared to simulated results.
ResultsThe experimental coil region of uniformity (ROU) was moved along the z axis as shown in simulation. The highest observed field deviation was 16.9% at the edge of the ROU with a shift of 35mm. The whole-body coils showed a median field deviation across all offsets below 5% with an eight-coil basis when using the SVD design method.
ConclusionExperimental results show the feasibility of a moving imaging region within an MRI with a low number of coils in the array. Magn Reson Med 78:784-793, 2017.

• 出版日期2017-8