Wavelength-modulation-spectroscopy for real-time, in situ NO detection in combustion gases with a 5.2 mu m quantum-cascade laser

作者：Chao, X.^*; Jeffries, J. B.; Hanson, R. K.

来源：Applied Physics B: Lasers and Optics , 2012, 106(4): 987-997.

DOI：10.1007/s00340-011-4839-y

• TUNABLE DIODE-LASERS
• NITRIC-OXIDE
• HIGH-PRESSURE
• ABSORPTION-MEASUREMENTS
• TRACE GASES
• SENSOR
• TEMPERATURE
• SYSTEMS
• DESIGN

A mid-infrared absorption strategy with calibration-free wavelength-modulation-spectroscopy (WMS) has been developed and demonstrated for real-time, in situ detection of nitric oxide in particulate-laden combustion-exhaust gases up to temperatures of 700 K. An external-cavity quantum-cascade laser (ECQCL) near 5.2 mu m accessed the fundamental absorption band of NO, and a wavelength-scanned, 1f-normalized WMS with second-harmonic detection (WMS-2f/1f) strategy was developed. Due to the external-cavity laser architecture, large nonlinear intensity modulation (IM) was observed when the wavelength was modulated by injection-current modulation, and the IM indices were also found to be strongly wavelength-dependent as the center wavelength was scanned with piezoelectric tuning of the cavity. A quantitative model of the 1f-normalized WMS-2f signal was developed and validated under laboratory conditions. A sensor was subsequently designed, built and demonstrated for real-time, in situ measurements of NO across a 3 m path in the particulate-laden exhaust of a pulverized-coal-fired power plant boiler. The 1f-normalized WMS-2f method proved to have better noise immunity for non-absorption transmission, than wavelength-scanned direct absorption. A 0.3 ppm-m detection limit was estimated using the R15.5 transition near 1927 cm(-1) with 1 s averaging. Mid-infrared QCL-based NO absorption with 1f-normalized WMS-2f detection shows excellent promise for practical sensing in the combustion exhaust.

• 出版日期2012-3