Angular-Velocity Control Approach for Stance-Control Orthoses

作者：Lemaire Edward D^*; Goudreau Louis; Yakimovich Terris; Kofman Jonathan

来源：IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2009, 17(5): 497-503.

DOI：10.1109/TNSRE.2009.2023308

• Gait
• knee ankle foot orthosis
• orthosis
• stance control

Currently, stance-control knee orthoses require external control mechanisms to control knee flexion during stance and allow free knee motion during the swing phase of gait. A new angular-velocity control approach that uses a rotary-hydraulic device to resist knee flexion when the knee angular velocity passes a preset threshold is presented. This angular-velocity approach for orthotic stance control is based on the premise that knee-flexion angular velocity during a knee-collapse event, such as a stumble or fall, is greater than that during walking. The new hydraulic knee-flexion control device does not require an external control mechanism to switch from free motion to stance control mode. Functional test results demonstrated that the hydraulic angular-velocity activated knee joint provided free knee motion during walking, engaged upon knee collapse, and supported body weight while the end-user recovered to a safe body position. The joint was tested to 51.6 Nm in single loading tests and passed 200 000 repeated loading cycles with a peak load of 88 Nm per cycle. The hydraulic, angular velocity activation approach has potential to improve safety and security for people with lower extremity weakness or when recovering from joint trauma.

• 出版日期2009-10