Numerical study on the effect of initial flow velocity on liquid film thickness of accelerated slug flow in a micro tube

作者：Muramatsu Kenshiro^*; Youn Youngjik; Han Youngbae; Hasegawa Yosuke; Shikazono Naoki

来源：International Journal of Heat and Fluid Flow, 2015, 54: 77-86.

DOI：10.1016/j.ijheatfluidflow.2015.04.005

• Two-phase flow
• Liquid film thickness
• Micro tube
• Acceleration
• Phase-Field method

Numerical simulation of air-water slug flows accelerated from steady states with different initial velocities in a micro tube is conducted. It is shown that the liquid film formed between the gas bubble and the wall in an accelerated flow is significantly thinner than that in a steady flow at the same instantaneous capillary number. Specifically, the liquid film thickness is kept almost unchanged just after the onset of acceleration, and then gradually increases and eventually converges to that of an accelerated flow from zero initial velocity. Due to the flow acceleration, the Stokes layer is generated from the wall, and the instant velocity profile can be given by superposition of the Stokes layer and the initial parabolic velocity profile of a steady flow. It is found that the velocity profile inside a liquid slug away from the bubble can be well predicted by the analytical solution of a single-phase flow with acceleration. The change of the velocity profile in an accelerated flow changes the balance between the inertia, surface tension and viscous forces around the meniscus region, and thus the resultant liquid film thickness. By introducing the displacement thickness, the existing correlation for liquid film thickness in a steady flow (Han and Shikazono, 2009) is extended so that it can be applied to a flow with acceleration from an arbitrary initial velocity. It is demonstrated that the proposed correlation can predict liquid film thickness at Re <4600 within the range of +/- 10% accuracy.

• 出版日期2015-8