A novel chemical heat pump cycle for cooling and heating

作者:Luo, Chunhuan*; Yang, Changchang; Zhang, Yichan; Xing, Zerong; Zhang, Yuanying
来源:Applied Thermal Engineering, 2018, 144: 59-64.
DOI:10.1016/j.applthermaleng.2018.08.019

摘要

The absorption heat pump cycle based on LiBr/H2O has shortcomings of easy crystallization, severe corrosion, and the limitation in the temperature rise. In this study, a novel chemical heat pump cycle is proposed to overcome these issues. The thermal performance of the chemical heat pump using NaNO3/H2O is simply calculated for communication. The results show that the chemical heat pump can work at a lower generating temperature of 73.9 degrees C and avoid the crystallization issue when simultaneously supplying heating and cooling at 60 degrees C and 7 degrees C, respectively. Moreover, the annual corrosion rate of carbon steel in the NaNO3/H2O strong solution is only 7.09 mu m y(-1) at 180 degrees C. The chemical heat pump has the advantages of lower generating temperature and corrosiveness, as well as larger temperature operating range and temperature rise in comparison to the absorption cycle using LiBr/H2O and other alternative working pairs. However, the chemical heat pump has a lower thermal performance, and the COPc, COPh, and COPo are 0.11, 1.11, and 1.22, respectively. In the future studies, it is expected that the chemical heat pump will achieve a much higher COP, after taking into account of a multiple-effect cycle, as well as a chemical refrigerant with a larger dissolution enthalpy and solubility slope.