An OFDM-based physical-layer feedback mechanism for relay selection in virtual MIMO systems

作者：Kuang, Yujun^*; Zhang, Enzhan

来源：COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2013, 32(2): 442-453.

DOI：10.1108/03321641311296855

• Relays
• Relay selection
• Feedback
• Physical-layer feedback space
• Virtual multiple-input multiple-output

Purpose - The purpose of this paper is to introduce an orthogonal frequency-division multiplexing (OFDM)-based 2-phase physical-layer feedback space (PFS) for distributed relay selection (RS) in virtual multiple-input multiple-output (VMIMO) systems. The proposed method is evaluated with numeric and simulation results.
Design/methodology/approach - Unlike minislots used in current MAC layer feedback, the authors introduce physical-layer feedback space (PFS) which hosts one-bit for each candidate relay (CR), for instance, a 48-subcarrier OFDM symbol hosts 48 bits. In the two-phase feedback procedure, each CR firstly hears the invitation and respond between cluster heads (CH) of upper-/down-stream cluster and decides whether to be a qualified relay or not. Then if it is qualified, it randomly selects one subcarrier and sends a pre-equalized one-bit feedback. The upper-stream CH evaluate all feedbacks in PFS, then selects all or a subset of relays with successful feedback and broadcasts its decision to all nodes. Although the number of successful feedbacks (NSF) drops as number of CR increases (NCR), 7 similar to 8 CR can be selected with high probability when NCR is triple that of total subcarriers (48).
Findings - In current literature, several traditional MAC layer feedback mechanisms are designed for relay selection in virtual MIMO (VMIMO) system most of which are based upon feedback minislots. For such methods, the number of active nodes should be estimated first and known to all participating nodes to choose optimal feedback possibility to obtain best successful feedback possibility. Furthermore, each minislot should include unique identification of candidate relay thus such methods can NOT be referred as one-bit feedback. In the new method, though OFDM subcarriers play the same role as minislots, they are exactly one-bit fashioned and occupies only multiple OFDM symbols which is much shorter than that in current methods.
Originality/value - By using physical-layer feedback space, exactly only one-bit is required for each candidate relay to send its feedback, and the overall overhead introduced for all of them is K-bit provided by the required PFS, which spans only fixed duration of the PFS, which is one or more OFDM symbols. Therefore, the proposed scheme can greatly reduce overhead and feedback delay during relay selection.

• 出版日期2013
• 单位电子科技大学