Discussion on modeling of thermal fatigue cracks in numerical simulation based on eddy current signals

作者：Wang, Jing^*; Yusa, Noritaka; Pan, Hongliang; Kemppainen, Mika; Virkkunen, Iikka; Hashizume, Hidetoshi

来源：NDT & E International, 2013, 55: 96-101.

DOI：10.1016/j.ndteint.2013.01.012

• Thermal fatigue crack
• Numerical modeling
• Finite element method
• Eddy current testing

This study evaluates modeling of thermal fatigue cracks by the finite element method from the view point of eddy current testing. Five artificial thermal fatigue cracks introduced into type 304 stainless steel plates were prepared for the research. Eddy current signals were gathered by a differential type plus point probe and subsequent destructive tests were performed to confirm the true profiles of the cracks. Numerical simulation based on the results of eddy current testing and destructive tests were carried out to show how the thermal fatigue cracks should be modeled in numerical simulations. The results of the numerical simulations revealed that thermal fatigue cracks tend to be much less conductive than stress corrosion cracks if they are assumed to have uniform conductivity inside. The results also imply that taking consideration of magnetization induced by the thermal fatigue process enables eddy current signals to be analyzed more quantitatively.

• 出版日期2013-4
• 单位华东理工大学