科研之友
微信
新浪微博
Facebook
分享链接
摘要
This two-article sequence on rubber-assisted embossing was aimed to understand the basic mechanisms affecting the pattern uniformity and replicability and to determine a process window for achieving uniform patterning and faithful replication. In Part I, the effects of major process and material parameters were identified and studied, and strategies for successful hot embossing with rubber as a pressure medium were proposed. In Part II, the rubber-assisted embossing process was analyzed considering the unique rheological behavior of the materials involved to develop useful predictive capabilities for this new process. Specifically, a finite-strain hyperelastic formulation was used for simulating the isothermal embossing stage, and a generalized Maxwell model was used to study the stress relaxation during the holding stage and to predict the elastic recovery after demolding. The rheological properties obtained in Part I were fitted to the constitutive models and implemented in the simulation procedures. The simulation results agreed with the major findings in the experimental work and provided a more quantitative insight into the process. POLYM. ENG. SCI., 51:601-608, 2011.
- 出版日期2011-3
