科研之友
微信
新浪微博
Facebook
分享链接
摘要
For the first time, martensite treatment was used to fabricate an ultrafine-grained (UFG) twinning-induced plasticity (TWIP) steel. The effects of cold rolling with 70 pct reduction at the liquid nitrogen temperature and subsequently annealing at 973 K (700 A degrees C) for 5 to 20 minutes on the microstructure and mechanical properties of Fe-22Mn-0.4C-1.5Al-1Si TWIP steel were investigated. The results showed that a fully recrystallized UFG TWIP steel with a mean grain size of about 400 to 600 nm can be produced by the designed martensite treatment. The UFG TWIP steel exhibited high yield and tensile strengths and relatively high ductility.
- 出版日期2017-7
