科研之友
微信
新浪微博
Facebook
分享链接
摘要
The SiCp/Mg-4Zn-0.5Ca composite was fabricated by semi-solid stirring assisted ultrasonic vibration and followed by ultra-slow-speed (0.01 mm s(-1)) extrusion at 280 degrees C. The results show that the as-extruded composite exhibits a typical bimodal microstructure consisted of similar to 96.2% ultrafine dynamic recrystallization (DRXed) grains (similar to 0.86 mm) and relatively coarse unDRXed regions in a shape of elongated strips. Large amount of nanoscale MgZn2 dynamically precipitated during ultra-slow-speed extrusion. The DRXed regions are thought propitious to the nucleation and growth of precipitate as compared with that of unDRXed regions. Compared with previous works on particle reinforced Mg matrix composites, the asextruded SiCp/Mg-4Zn-0.5Ca composite not only possess high yield strength (322.7 MPa) and ultimate tensile strength (409.1 MPa), but also exhibit excellent ductility (10.1%). The ultrafine DRXed grains and large amount of dynamic precipitated nanoscale MgZn2 are thought responsible for the superior strength of present composite. A typical linear hardening stage appears in the work hardening rate curve of asextruded composite. Compared with the hinder effect of SiCp and dynamic precipitated nanoscale MgZn2 on the movement of dislocations, the ultrafine DRXed grains play a main role on aggravating the dynamic recovery rate in stage III.
- 出版日期2017-2-25
- 单位太原理工大学
