Application of Response Surface Methodology for Catalytic Hydrogenation of Nitrobenzene to Aniline Using Ruthenium Supported Fullerene Nanocatalyst

作者：Keypour Hassan^*; Noroozi Mohammad; Rashidi Alimorad; Shariati Rad Masoud

来源：Iranian Journal of Chemistry and Chemical Engineering (International English Edition), 2015, 34(1): 21-32.

• Hydrogenation
• Nitrobenzene
• Aniline
• Ruthenium
• Fullerene
• Response surface methodology

In this study fullerene functionalized using oleum (H2SO4 center dot SO3), followed by the hydrolysis of the intermediate cyclosulfated fullerene as well as an oxidizing agent was employed to functionalize the fullerenes. Ruthenium was then added by the impregnation method or deposited on the functionalized fullerene. Subsequent to this step, Response Surface Methodology (RSM) was used to study the cumulative effect of various parameters including, pressure, temperature, time and loading. In order to maximize the hydrogenation of nitrobenzene (NB) to aniline (AN) these latter parameters were optimized. Furthermore, catalytic activity was evaluated over a temperature range of 25-150 degrees C, hydrogen pressure of 1-30 atm, ruthenium content of 1-15%(w/w) and reaction time of 30-180 min in a bench scale reactor. The optimized model predicted that the hydrogenation should be at a maximum level (approximately 100%) with the following conditions; Ru loading of 15%, reaction temperature of 150 degrees C, reaction time of 180 min and hydrogen pressure of 22.33 atm.

• 出版日期2015