科研之友
微信
新浪微博
Facebook
分享链接
摘要
Additive Manufacturing (AM) technique has been utilized in a variety of engineering applications because of its desirable characteristic of mass customized manufacturing. Polyjet 3 Dimensional Printing (3DP) is one among the various AM techniques which is well known for fabrication of part with multiple materials. Meanwhile, strength and stiffness of polyjet 3DP part is typically less and hence it is difficult to use it for engineering applications. To maximize polyjet 3D printed part stiffness, this study explores the novel methodology by incorporating high strength material among the multi materials as reinforcement in Additive Manufactured Multi Material (AM MM) structure. Uni-axial tensile test and fracture surface analysis over reinforced AM structure was carried out to investigate the influence of reinforcement and its orientation with respect to loading direction. The experimental result shows that addition of reinforcement enhanced the elastic modulus significantly as well as improvement in elastic modulus varies between 6.79% and 21.03% with respect to reinforcement orientation. Along with this, we have proposed simpler analytical method based upon Rule of Mixture (RoM) equation to predict the elastic modulus of reinforced AM structure. Comparison of the analytical method results with the experimental results implies that there is a good agreement between them. Methodology proposed in this work could be very useful in the cases of predicting strength of reinforced AM structure for engineering application.
- 出版日期2015-2-5
