Study on microstructure and thermal properties of a CNF/Cu nanocomposite fabricated using chemical mixing

作者：Shin Ari; Kim Yong In; Ko Se Hyun; Han Jun Hyun^*

来源：Journal of Alloys and Compounds, 2018, 737: 21-30.

DOI：10.1016/j.jallcom.2017.12.034

• CNF/Cu composite
• Microstructure
• Thermal analysis
• Electroless plating
• Chemical mixing

The microstructure and thermal properties of a carbon nanofiber reinforced copper matrix (CNF/Cu) nanocomposite processed by chemical mixing, with an electroless plated copper coating on the CNFs, were analyzed in depth and compared with those of nanocomposites processed by conventional mechanical powder mixing and wet powder mixing. The electroless copper plating on the surfaces of the individual CNFs enabled them to become embedded inside copper particles, which successfully solved the non-uniform dispersion of CNFs in Cu matrix, the most important problem in CNF/Cu nanocomposite manufacturing. The CNF/Cu nanocomposite prepared by chemical mixing had well dispersed CNFs, no pores, and no intermediate phase which can be a cause of thermal resistance. Its thermal conductivity was accordingly much higher (435 W/mK) than the nanocomposites processed by mechanical powder mixing and wet powder mixing, as well as the theoretical thermal conductivity of copper (398 W/mK).

• 出版日期2018-3-15