科研之友
微信
新浪微博
Facebook
分享链接
摘要
Pyrolysis experiments of n-hexane were performed and the product distribution and fuel consumption were measured as a function of temperature. The experimental temperatures ranged from 550-675 degrees C, with a pressure of similar to 1 atm, and residence times of similar to 5 s. N-Hexane was used as a model compound to represent the linear alkanes that might be found in practical hydrocarbon fuels. Under these conditions, high fuel conversion was observed at the higher temperatures and a wide range of products were formed. The experimental observations were compared to predictions from a plug-flow model using a reaction mechanism consisting of 205 species and 1403 reactions. The hydrogen abstraction and isomerization rate coefficients in this model were based on CBS-QB3 calculations. The only model modification was adjustment of the A-factor of the initiation rates to match conversion at one temperature. This model was able to successfully predict the observed trends in both product selectivities as well as fuel conversion over the temperature range. The mechanism was also used to capture the trends previously observed in n-butane pyrolysis under similar experimental conditions. Significant differences in the sensitivity coefficients for the hexane and butane systems are discussed in terms of the competition between P-scission and isomerization of the initial radicals formed. The kinetic model predicts that n-hexane will be completely converted within 0.1 s in the higher temperature environment (similar to 800 degrees C of the anode channel of a solid-oxide fuel cell (SOFC). This result clearly illustrates the need to explicitly account for gas-phase reactions in SOFC models for those cases where hydrocarbons, especially those larger than methane, are fed directly to an SOFC.
- 出版日期2007-8-21
