A Design Method for Microstrip Directional Couplers Loaded With Shunt Inductors for Directivity Enhancement

作者：Lee Seungku^*; Lee Yongshik

来源：IEEE Transactions on Microwave Theory and Techniques, 2010, 58(4): 994-1002.

DOI：10.1109/TMTT.2010.2042544

• Directional coupler
• directivity enhancement
• isolation enhancement
• microstrip directional coupler
• parallel coupled line
• parallel coupled-line coupler
• parasitic effect
• 20-dB coupler

An accurate design method is proposed for directivity enhancement of microstrip directional couplers loaded with shunt inductors. The parasitic effects of junction discontinuities in various parts of such microstrip directional couplers have critical effects especially on the directivity, and therefore they must be taken into account. Without proper modeling of these parasitic effects, directivity enhancement becomes extremely difficult especially for weak coupling levels. The demonstrated method of analysis can be applied to obtain exact designs of all previous microstrip directional couplers that are loaded symmetrically with series and/or shunt reactance for directivity enhancement, regardless of the coupling levels. Based on the proposed method, a 20-dB microstrip directional coupler is designed at 2.4 GHz. A maximum directivity of 56 dB has been measured, which is an improvement of 48 dB over a conventional microstrip directional coupler. A 16.3% bandwidth at 2.4 GHz has been measured in which the directivity remains above 20 dB, while the maximum variation in the coupling level is 0.5 dB. This is the first work to demonstrate directivity of more than 50 dB for a 20-dB microstrip directional coupler.

• 出版日期2010-4