Measurement of intrahepatic pressure during radiofrequency ablation in porcine liver

作者:Kawamoto Chiaki*; Yamauchi Atsushi; Baba Yoko; Kaneko Keiko; Yakabi Koji
来源:Journal of Gastroenterology, 2010, 45(4): 435-442.
DOI:10.1007/s00535-009-0156-1

摘要

To identify the most effective procedures to avoid increased intrahepatic pressure during radiofrequency ablation, we evaluated different ablation methods. Laparotomy was performed in 19 pigs. Intrahepatic pressure was monitored using an invasive blood pressure monitor. Radiofrequency ablation was performed as follows: single-step standard ablation; single-step at 30 W; single-step at 70 W; 4-step at 30 W; 8-step at 30 W; 8-step at 70 W; and cooled-tip. The array was fully deployed in single-step methods. In the multi-step methods, the array was gradually deployed in four or eight steps. With the cooled-tip, ablation was performed by increasing output by 10 W/min, starting at 40 W. Intrahepatic pressure was as follows: single-step standard ablation, 154.5 +/- A 30.9 mmHg; single-step at 30 W, 34.2 +/- A 20.0 mmHg; single-step at 70 W, 46.7 +/- A 24.3 mmHg; 4-step at 30 W, 42.3 +/- A 17.9 mmHg; 8-step at 30 W, 24.1 +/- A 18.2 mmHg; 8-step at 70 W, 47.5 +/- A 31.5 mmHg; and cooled-tip, 114.5 +/- A 16.6 mmHg. The radiofrequency ablation-induced area was spherical with single-step standard ablation, 4-step at 30 W, and 8-step at 30 W. Conversely, the ablated area was irregular with single-step at 30 W, single-step at 70 W, and 8-step at 70 W. The ablation time was significantly shorter for the multi-step method than for the single-step method. Increased intrahepatic pressure could be controlled using multi-step methods. From the shapes of the ablation area, 30-W 8-step expansions appear to be most suitable for radiofrequency ablation.

  • 出版日期2010-4