Minimization of cutting force, temperature and surface roughness through GRA, TOPSIS and Taguchi techniques in end milling of Mg hybrid MMC

作者：Gopal P M^*; Prakash K Soorya

来源：Measurement, 2018, 116: 178-192.

DOI：10.1016/j.measurement.2017.11.011

• Magnesium
• Composite
• Milling
• Cutting Force
• Temperature
• GRA
• TOPSIS

Present study investigates the effect of material and machining parameters on cutting force, surface roughness and temperature in end milling of Magnesium (Mg) Metal Matrix Composite (MMC) using carbide tool. Mg hybrid composite was fabricated by reinforcing Cathode Ray Tube (CRT) panel glass, an intensifying E-waste and Boron Nitride (BN) particles through powder metallurgy method. The milling experiments were conducted based on L27 orthogonal array designed by considering CRT glass particle size and weight percentage, tool diameter, speed, feed and depth of cut as input process parameters. Multi objective optimization was done through Grey Relational Analysis (GRA) and Techniques for Order Preferences by Similarity to Ideal Solution (TOPSIS). Both of the techniques provided a similar optimum parameter condition i.e. 10 mu m particle size, 5% reinforcement, 8mm diameter tool, 710 rpm speed, 20 mm/min feed and 0.5mm depth of cut that outcomes in 139.48 N in-feed force, 63.92 N cross-feed force, 42.6 N thrust force, 68.96 degrees C temperature and 0.198 mu m surface roughness. ANOVA is performed to identify significance and also the effect of each process variables on response parameters. Though all the parameters were found to be significant, reinforcement weight% and particle size affects the response parameters as that of machining parameters whereas speed turned to be the least significant factor.

• 出版日期2018-2