摘要

In the concurrent multiscale analysis, it is difficult to have truly seamless transition between the atomistic and continuum scale. This situation is even worse when defects pass through the boundary between different scales. For example, there is a lack of effective methods to handle the dislocation passing through scale boundaries which is important to investigate plasticity at the nanoscale. In this paper, the generalized particle (GP) method proposed by the first author is further developed so that a seamless transition and dislocation passing between different scales can be realized. Specifically, the linkage between different scales is through material neighbor-link cells (NLC) with scale duality. This indicates that material elements can be high-scale particles through a lumping process and can also be atoms via decomposition depending on the needs of the simulation. At the interface, the information transfer from bottom scale-up or from top scale-down is through the particles or atoms in the NLC. They are with the same material structure, all possess nonlocal constitutive behavior; thus, the smooth transition at the interface between different scales can be attained and validated to avoid non-physical responses. To save degrees of freedom, atoms are lumped together into a generalized particle in the domain in which the deformation gradient is near homogeneous. On the other hand, when defects such as dislocations in the atomistic domain are near the particle domain, the particles along dislocation propagation path and its surrounding region will be decomposed into atoms so dislocations can freely pass through the scale boundary and propagate inside the model just as it propagates in the deformed atomistic crystal structure. The method is verified first for seamless transition of variables at the scale boundary by a one-dimensional model and then verified for dislocation nucleation and propagation passing through scale boundaries in two cases, one is near the free surface and the other is inside of the copper nanowire. All the validations are through comparisons with fully atomistic analyses under same conditions. The comparison is satisfactory.

  • 出版日期2011-12